Skip to content
<faris />
cd ../projects

project 02 · Embedded Systems / IoT / PCB Design

Vora Smart AC ControllerIoT hardware

Custom-designed embedded hardware enabling intelligent air-conditioning control and energy monitoring for Vora.

  • ESP32
  • Embedded C/C++
  • KiCad
  • IR
  • Power monitoring
  • Wi-Fi
  • BLE
  • MQTT
ESP32PWR REGPWR MONIR TXWIFI/BLEfig. illustrative

// problem

Conventional air-conditioning units offer little remote control or visibility into energy use. The product needed connected, manufacturable hardware that could control existing units and measure their consumption.

// solution

An ESP32-based controller on a custom KiCad PCB, with IR control of AC units, power monitoring, and Wi-Fi / BLE / MQTT connectivity taken from prototype to a design used for further production.

25

additional boards ordered using the delivered and validated PCB design

01

Circuit design

The board integrates the ESP32 module, power regulation, IR transmission circuitry, and power-monitoring front end on a single manufacturable PCB designed in KiCad.

02

Firmware architecture

Firmware on the ESP32 handles IR command generation for the AC unit, samples power measurements, and exposes control and telemetry over Wi-Fi, BLE, and MQTT-related interfaces.

03

From prototype to production

After prototype integration and testing, the initial PCB designs were delivered and 25 additional boards were subsequently ordered using the design, marking the step from one-off prototype to repeatable hardware.

next project

Navi-Qart